Ruggedcom RSG2300 Manuale Utente Scaricare il pdf (Pagina 34)

5. EMI And Environmental Type Tests

RuggedCom® RuggedSwitch® 34 RSG2300 Installation Guide Rev 110

Test Description Test Levels

Enclosure Contact +/- 8kV

IEEE C37.90.3 ESD

Enclosure Air +/- 15kV

IEEE C37.90.2 Radiated RFI Enclosure ports 35 V/m

Signal ports +/- 4kV @ 2.5kHz

D.C. Power ports +/- 4kV

A.C. Power ports +/- 4kV

IEEE C37.90.1 Fast Transient

Earth ground ports

+/- 4kV

Signal ports 2.5kV common mode @1MHz

D.C. Power ports 2.5kV common, 1kV diff. mode@1MHzIEEE C37.90.1 Oscillatory

A.C. Power ports 2.5kV common, 1kV diff. mode@1MHz

Signal ports 5kV (Fail-Safe Relay output)

D.C. Power ports 5kVIEEE C37.90 H.V. Impulse

A.C. Power ports 5kV

Signal ports 2kVAC

D.C. Power ports 1.5kVDCIEEE C37.90 Dielectric Strength

A.C. Power ports 2kVAC

Table 5.2. IEEE 1613 (C37.90.x) EMI Immunity Type Tests

Test Description Test Levels Severity Levels

IEC 60068-2-1 Cold Temperature Test Ad -40°C, 16 Hours N/A

IEC 60068-2-2 Dry Heat Test Bd +85°C, 16 Hours N/A

IEC 60068-2-30

Humidity (Damp

Heat, Cyclic)

Test Db 95% (non-condensing), 55°C , 6 cycles N/A

IEC 60255-21-1 Vibration 2g @ (10 - 150) Hz Class 2

IEC 60255-21-2 Shock 30g @ 11mS Class 2

Class 2 refers to “Measuring relays and protection equipment for which a very high security margin is required or where

the vibration levels are very high, e.g. for shipboard applications and for severe transportation conditions.”

Table 5.3. Environmental Type Tests

1 2 ... 29 30 31 32 33 34 35 36

Nessun commento

Ruggedcom RSG2300 Manuale Utente Pagina 34