Ruggedcom RSG2300 Manuale Utente Scaricare il pdf (Pagina 16)

3. Installation

RuggedCom® RuggedSwitch® 16 RSG2300 Installation Guide Rev 110

Figure 3.11. 100FX ST connector

3.2.3. Power Supply Wiring And Grounding

The RSG2300 supports a single AC or DC power supply, PS1, and a separate 48VDC power

supply, PS2, which provides power to the PoE ports.

The connections for PS1, PS2 and the fail-safe relay are located on the terminal block as shown

in Figure 3.12, “RS2000 Series Phillips Screw Terminal Block” and Figure 3.13, “RS2000 Series

Phoenix Plug Terminal Block”.

The RSG2300 can be equipped with either a Phillips Screw Terminal Block or a Phoenix Pluggable

Terminal Block. The Phillips Screw Terminal Block has Phillips screws with compression plates,

allowing either bare wire connections or crimped terminal lugs. We recommend the use of #6 size

ring lugs to ensure secure, reliable connections under severe shock or vibration. Both terminal

blocks have a safety cover which must be removed via two Phillips screws before connecting

any wires. The safety cover must be re-attached after wiring to ensure personnel safety. Refer

to Table 3.1, “RSG2300 Power Terminal Block Connection Description” for a description of each

terminal. Refer to Section 3.2.3.1, “AC Power Supply Wiring Examples RSG2300”, Section 3.2.3.2,

“DC Power Supply Wiring Examples RSG2300 and RSG2300P” and Section 3.2.3.3, “AC and DC

Power Supply Wiring Example RSG2300 and RSG2300P” for power supply wiring examples.

Figure 3.12. RS2000 Series Phillips Screw Terminal Block

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Nessun commento

Ruggedcom RSG2300 Manuale Utente Pagina 16